Series AI DISC Springs

Diameter

in Inches

D

Diameter

in Inches

D

Diameter

in Inches

D

.187 to .750 1.000 to 1.75 2.000 to 2.500

Series AI pre-stressed disc springs are used to maintain load or tension in bolted assemblies. Pressure begins at the outer radius and flattens gradually toward the bolt as deflection progresses. Disc springs exert a uniform pressure that remains constant despite tension losses caused by thermal expansion and contraction, compression set or wear of parts. Because pressures are predictable, disc springs provide a simple and effective means of determining bolt tension that is far more accurate than "torque" readings.

A Typical Bolted application

A typical Bolted assembly utilizing disc springs

 

Home

FAN DISC CORPORATION

8127 Clybourn Avenue Sun Valley CA 91352

(818) 767-1886 · (818) 767-7415 FAX

©Copyright 1997 Fan Disc Corporation