**DISC SPRING LOAD
CALCULATIONS**

**TRUE RADIUS FACTOR**

If the disc spring is made as shown in the Non typical figure, which is unusual, thenR=O.D./2.

Most disc springs are made as in the typical figure. Therefore, the load bearing radius is not equal to half of the maximum outside diameter. To calculate R, the angle Beta first has to be determined

Disc Spring Load Calculations **Home**

FAN DISC
CORPORATION |

8127 Clybourn Avenue Sun Valley CA 91352 |

(818) 767-1886 · (818) 767-7415 FAX |

©Copyright 1997 Fan Disc Corporation |