DISC SPRING LOAD CALCULATIONS

CORNER RADIUS FACTOR

A well designed disc spring has radii at all corners to reduce stress concentrations at the edges. A suitable radius is approx. = t/6. This radius further reduces dimension R (see Fig 4). Usually the overall height of the disc spring is specified because it is easy to measure and control. The cone height h , on the other hand, is difficult to measure.

 

Disc Spring Load Calculations Home

FAN DISC CORPORATION

8127 Clybourn Avenue Sun Valley CA 91352

(818) 767-1886 · (818) 767-7415 FAX

©Copyright 1997 Fan Disc Corporation