DISC SPRING TOLERANCES

DISC SPRING HARDNESS RANGE:
FOR C1075 AND AISI 6150
Thickness of Disc ROCKWELL C
MM INCH
0.2 - 0.9 .008 - .035 46-51
1.0 - 4.0 .039 - .157 44-49
4.25 - 16.0 .164 - .630 42-48

For Stainless Steel and Inconel, consult factory

(Note: The tolerances shown in the table are for M series of material C1075 or AISI 6150. For tolerances on other series, such as Stainless, SP, AL, etc. consult factory.)

Disc Spring Tolerances Home

FAN DISC CORPORATION

8127 Clybourn Avenue Sun Valley CA 91352

(818) 767-1886 · (818) 767-7415 FAX

©Copyright 1997 Fan Disc Corporation